PDMS TUTORIALS

 PDMS TUTORIALS :

SOURCE : YOUTUBE

1. TUTORIAL-1 HOW TO CREATE EQUIPMENT & SIMPLE MOVING COMMAND
2. TUTORIAL 2 HOW TO MEASURE DISTANCE
   
3. TUTORIAL 3 HOW TO CREATE NOZZLE AND CREATE HOLE BY NEGATIVE PRIMITIVES.
   
4. TUTORIAL 4 HOW TO OFFSET & ROTATE NOZZLE.
   
5. TUTORIAL 5 HOW TO MIRROR, OFFSET & ROTATE EQUIPMENT.
   
6. TUTORIAL 6 HOW TO MODIFY EQUIPMENT & NOZZLE.
   
7. TUTORIAL 7 HOW TO CREATE STANDARD EQUIPMENT (HEAT EXCHANGER,AIR COOLER, VESSEL & PUMPS.
8. TUTORIAL 8 HOW TO MODIFY STANDARD EQUIPMENT ACCORDING TO CONSTUCTION DRAWING
   
9. TUTORIAL 9 PIPING MODELLING IN SINGLE BRANCH CONNECTION.
   
10. TUTORIAL 10 HOW TO CREATE MORE THAN 1 BRANCHES WITH TEE. ( PIPE MODELLING)
    
11. TUTORIAL 11 HOW TO USE EXPLICIT COMMAND IN PIPING MODELING
    
12. TUTORIAL 12 HOW TO CREATE STRUCTURE BEAM & COLUMN , EXTEND & COPY/PASTE
13. TUTORIAL 13 DB LISTING/ HOW TO TRANSFER YOUR PDMS WORK FROM PC TO OTHER PC BY PENDRIVE
14. TUTORIAL 14 HOW TO MODIFY WHOLE BRANCH BORE SIZE, SPEC AND FLANGE TYPE.
15. TUTORIAL 15 ISODRAFT/ HOW TO EXTRACT PIPING ISOMETRIC BY TWO MATHOD
16. TUTORIAL 16 HOW TO CREATE MTO REPORT DIRECTLY IN EXCEL.
17. TUTORIAL 17 HOW TO MOVE ANY OBJECT BY RELATIVE BY METHOD
18. TUTORIAL 18 HOW TO ROTATE A NOZZLE ON VESSEL SURFACE VERTICALLY BY 30 deg.
19. TUTORIAL 19 HOW TO OFF ANY COMPONENT MTO
20. TUTORIAL 20 HOW TO OFF MUTLIPLE COMPONENT MTO BY LIST METHOD 

       << READ OTHER INTERESTING POST >>

   PIPING SUPPORTS

      

  READ MORE >>

EXPANSION LOOP CALCULATION

   

 READ MORE >>

     DISTILLATION COLUMN PIPING

    

       READ MORE >> 

 PIPE RACK PIPING

       READ POST >>

     TYPES OF GASKET

        READ POST >>

        OIL & GAS PROCESS

          

       READ POST >>